Analisis Kekuatan Tarik Komposit Termoseting Hibrid Serat Bambu -E-Glass/ Epoxy Unidirectional 0° Vs Hibrid Serat Bambu E-Glass WR/ Epoxy dan Aplikasinya Pada Struktur Frame Quadkopter
Abstract
The uses of natural fiber in composite structures have increased recently. These fibers are considered ‘green’ and foreseen as an alternative fiber substitute in the furture. The aim of the research is to obtain the mechanical characteristics of the hybrid thermosetting composites with bamboo-E-Glass fiber reinforcements by using epoxy as matrix. The fibers were arranged to make a unidirectional 0° and bidirectional (0°/90°). Composite manufacturing method used hand lay-up and vacuum bagging. Tensile test conducted according to standard size ASTM D3039, and the results were analyzed using two parameters Weibull distribution. The results showed that the hybrid thermosetting bamboo-E-Glass composites have potentials to be made as quadcopter frame structures.
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Elanchezhian C, Ramnath B V, Ramakrishnan G, Rajendrakumar M, Naveenkumar V and Saravanakumar M K 2018 Review on mechanical properties of natural fiber composites. Mater. Today Proc. 5 1785–90
Siengchin S 2017 Editorial corner - a personal view Potential use of ‘green’ composites in automotive applications Express Polym. Lett. 11 600
Sanjay M R, Madhu P, Jawaid M, Senthamaraikannan P, Senthil S and Pradeep S 2018 Characterization and properties of natural fiber polymer composites: A comprehensive review J. Clean. Prod. 172 566–81
Farsi M 2012 Thermoplastic Matrix Reinforced with Natural Fibers: A Study on Interfacial Behavior Some Crit. Issues Inject. Molding
Nejad A F, Salim M Y Bin, Koloor S S R, Petrik S, Yahya M Y, Hassan S A and Shah M K M 2021 Hybrid and synthetic FRP composites under different strain rates: A review Polymers (Basel). 13
Witono K, Surya Irawan Y, Soenoko R and Suryanto H 2013 Pengaruh Perlakuan Alkali (NaOH) Terhadap Morfologi dan Kekuatan Tarik Serat Mendong J. Rekayasa Mesin 4 227–34
Topan Asmoro A, Helmy P and Sri Mulyo R B 2018 Pengaruh Ketebalan Komposit Matrik Resin Dengan Penguat Kulit Eceng Gondok (Eichhornia Crassipes) Yang Dianyam Terhadap Kemampuan Balistik J. Ilm. Momentum 14
Defoirdt N, Biswas S, Vriese L De, Tran L Q N, Acker J Van, Ahsan Q, Gorbatikh L, Vuure A Van and Verpoest I 2010 Assessment of the tensile properties of coir, bamboo and jute fibre Compos. Part A Appl. Sci. Manuf. 41 588–95
Budiman A and Sugiman S 2016 Karakteristik Sifat Mekanik Komposit Serat Bambu Resin Polyester Tak Jenuh Dengan Filler Partikel Sekam Din. Tek. Mesin 6
Method S T 2002 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials 1 15
NJ V 2017 Animal communication: when i’m calling you, will you answer too? Curr. Biol. 27 13–5
Wakhidah D F 2020 Sifat mekanik dan fisis komposit pada socket kaki palsu (Universitas Negeri Semarang)
Banowati L, Sari P and Hadi B K 2021 Comparison analysis of abaca fiber/polyester and abaca- e-glass/polyester hybrid composites to impact strength and its application to ballistic IOP Conf. Ser. Mater. Sci. Eng. 1173 012068
Surdia T and Saito S 1985 Pengetahuan Bahan Teknik (Pradnya Paramita)
M.Sc. Doan T T L 2011 Investigation On Jute Fibres And Their Composites Based On Polypropylene And Epoxy Matrices J. Mater. Sci. 122 2584–9
Fatriasari, W. & Hermiati E 2008 Analysis of Fiber Morphology and Physical-Chemical Properties of Six Species of Bamboo as Raw Material for Pulp and Paper J. Ilmu dan Teknol. Has. Hutan 1 67–73
Setiawan J D, Caesarendra W and Ariyanto M 2015 Perancangan Struktur Frame Quadrotor Rotasi 17 130
DOI: http://dx.doi.org/10.28989/senatik.v7i0.470
Article Metrics
Abstract view : 157 timesPDF (Bahasa Indonesia) - 65 times
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Conference SENATIK P-ISSN :2337-3881 and E-ISSN : 2528-1666
Jumlah penggunjung = orang