OPTIMALISASI LETAK NOZZLE VENTURI MIXER PADA GENSET BERBAHAN BAKAR BIOGAS

Muhrom Khudhori

Abstract

Carburetor modification to the venturi mixer to put a hole in the center of the venturi (end of hole venturi type nozzle on the outlet end venturi section) can turn the engine generator using biogas fuel. Airflow velocity carburetor venturi section will begin upon entering the venturi section and will be maximal at the time in the middle of the venturi section. So of course the location of the placement of venturi carburetor venturi mixer on the right cross section will be obtained velocity airflow + optimum biogas. It is necessary for optimizing the placement location of the modification of the carburetor venturi mixer, air flow + in order to obtain optimum biogas which will have implications for the performance of the generator engine. In this research, manufacture three prototypes nozzle venturi mixer that will be placed at different places in the venturi duct, then the performance test was done to determine the type and location of the venturi nozzle prototype mixer is optimal. From the results of this study that : 1) Prototype nozzle venturi mixer with the tip of the nozzle in the middle (shape elbow) has the most complicated construction than the second type (type 1 and 2) the other. Manufacturing and assembly to form the elbow (type 3) is also more complicated and more difficult , this is because the space available / remaining biogas is limited to hole channel, and 2) Using a prototype generator machine type 3 is more stable when compared with other types, despite the decline, but not very significant in comparison with the other 2 types, so the prototype mixer venturi nozzle is the most optimal type 3 (square shape).

Keywords

Optimization, Nozzle Venturi Mixer, Biogas, Carburetor, Modification

References

Anonymous, 2006. “ Blue Print Pengelolan Energi Nasional 2005-2025 “, ESDM, Jakarta.

Anonymous. 2009.” Profil Pengembangan Bio-Energi Perdesaan (Biogas) ”, Departemen Pertanian, Jakarta.

Anonymous.2010.” Pedoman Teknis Pengembangan Usaha Pengolahan Kompos Dan Biogas ”, Kementerian Pertanian, Jakarta.

Anonymous. 2010.” Rencana Umum Energi Daerah (RUED) Propinsi DIY ”, Dinas PUP-ESDM Propinsi DIY, Yogyakarta.

Khudhori M. 2010. ” Konsep Pertanian Terpadu Dengan Prinsip “ Zero Waste” Pilot Project DME Di Kelompok Kandang Berbah ”, Paguyuban Peduli Sleman (PPS), Yogyakarta.

Khudhori, M. 2011. Desain Modifikasi Karburator Dengan Penambahan Venturi Mixer Tipe Nozzle Pada Mesin Bensin Penggerak APPO Berbahan Bakar Biogas Daya 6,5 HP Untuk Mendukung Konsep Pertanian Terpadu (Zero Waste) Di Pilot Plant DME (Desa Mandiri Energi) Berbah, Laporan Penelitian Kopertis V Tahun 2011.

Nugraha S.A., 2011.” Modifikasi Karburator Genset Bahan Bakar Bensin Menjadi Bahan Bakar Biogas atau Bensin (Hybrid) Pada Mesin Bensin 4 Langkah Tipe GX 154 Yasuka”. Skripsi S-1, Jurusan Teknik Mesin STTA, Yogyakarta, tidak dipublikasikan.

Mitzlaff K.V. 1988. ” Engine For Biogas ”, GTZ. Africa.

Pulkrabek W.W., 2004. “Engineering Fundamental of the Internal combustion Engin

Article Metrics

Abstract view: 332 times
Download     : 273   times

Refbacks

  • There are currently no refbacks.