PERANCANGAN TATA LETAK FASILITAS LABORATORIUM PERAWATAN PESAWAT TERBANG

Eko Poerwanto

Abstract


Each system installed in the aircraft requires high accuracy . Aircraft maintenance will be able to be reliable if all maintenance support needs ergonomically designed . One factor that is needed in the laboratory is an ergonomic layout needs good facilities . The layout of the facility that will support in improving the accuracy required in aircraft maintenance . The purpose of this study is to determine and organize work area and all the optimal aircraft maintenance facilities . The method used is to use the ARC and the Work Sheet . Based on the results of the analysis using ARC and Work Sheet layout arrangement forms an ideal material for aircraft maintenance is fixed (fixed material location ) . While the treatment facility will be located around the main products,namely plane that is on the floor is desired perawatan. Hope STTA as sound institutions may have facilities aerospace aircraft maintenance practices are sufficient.


Keywords


aircraft maintenance, facility layout, ARC

References


Apple, James M., (1990) Tata Letak Pabrik dan Pemindahan Bahan,

Edisi Ketiga, Penerbit ITB, Bandung.

Arikunto, Suharsimi, (2002) Prosedur Penelitian: Suatu Pendekatan Praktek, Edisi Revisi V, PT. Rineka Cipta, Jakarta.

Balakrishnan, Jaydeep, Chun Hung Cheng, and Daniel G. Conway, (2000), An Improved Pairwise Exchange Heuristic for the Dynamic Plant Layout Problem, International Journal of Production Research.

Darmatmo, (2007).,Diktat Aircraft Maintenance., STTA Yogyakarta.

Esa M.R.,Thomas A.B., David S.W., Mathew S.H.,Yusef O.E., and Michelle L.W. (2003), Human Factors Conciderations in The Design of An Aircraft Maintenance Hangar, Proceedings of the 47th. Annual Meeting of the Human Factors and Ergonomics Society, Santa Monica.

Francis, Richard L., Leon F. McGinnis, Jr., and John A. White, (1992), Facility Layout and Location: An Analytical Approach, Edisi Kedua, Prentice-Hall, Inc.,New Jersey.

Kosterman, (2007), Desain Tata Letak Penempatan Alat Kedokteran GigiDental Device Layout Design, Bagian Ilmu dan Teknologi Kedokteran Gigi Fakultas Kedokteran Gigi Universitas Padjadjaran.

Moore, James M., (1962) Plant Layout and Design, The Macmillan Company, New York.

SKEP/53/III/2001 dari Dirjen Perhubungan Udara, tentang Petunjuk Pelaksanaan (Staff Instruction Nomor 147-1) berkaitan Persetujuan Organisasi Pelatihan Perawatan Pesawat Udara (Aircraft Maintenance Training Organization (AMTO)certificates issued pursuant to Civil Aviation Safety Regulations (CASR). Part 147.

Wignjosoebroto, S., 2003, Tata Letak Pabrik dan Pemindahan Bahan, Guna Widya.

Wignjosoebroto, S., Rahman, A., dan Pramono, D.(2006), Perancangan Lingkungan Kerjadan Alat Bantu yang Ergonomis untuk Mengurangi Masalah Back Injury danTingkat Kecelakaan Kerja pada Departemen Mesin Bubut (Studi Kasus PT AtakIndometal Ngingas Waru-Sidoarjo).

Yuriyanto, (2009).,Perancangan Ulang Tata Letak Lantai Produksi dengan MenggunakanMetode Pairwise Exchange di PT. Cahaya Kawi Ultra Polyintraco, Tugas AkhirDepartemen Teknik Industri Fakultas Teknik USU Medan.




DOI: http://dx.doi.org/10.28989/senatik.v1i0.55

Article Metrics

Abstract view : 555 times
PDF (Bahasa Indonesia) - 423 times

Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Conference SENATIK P-ISSN :2337-3881 and  E-ISSN : 2528-1666

Jumlah penggunjung = Web Analytics orang

Statistik Senatik

Flag Counter