Amine Based Corrosion Inhibition Analysis On Suram West Area – Petapahan And Kotabatak – Petapahan API 5L Grade B Pipeline
Abstract
In Petapahan, Kotabatak, and Suram West Area Gathering Station, Hot water shipping system is used as oil shipping system for production. This fluid is highly corrosive and there is no corrosion protection by corrosion inhibition available for this pipeline until now, hence multiple leaks occurred massively since several years ago. This thesis focused in analysis of amine-based corrosion inhibitor with several concentration variations against API 5 L Grade-B corrosion rate in waxy oil fluid inside Petapahan - Kotabatak and Suram West Area – Petapahan Pipeline. Concentration variation that used are 0, 20, 40, 60, 80 and 100 ppm while pipe has outside diameter of 4.5 in (114.3 mm) and thickness of 0.237 in (6.02 mm). Corrosion rate analysis conducted using potentiodynamic polarization (Tafel plot). For Petapahan – Kotabatak fluid, corrosion rates are 10.51, 15.85 and 46.60 mpy at temperature of 30, 40 and 50 C. 20 ppm amine-based inhibitor injection at 50 C showed lowest corrosion rate at 46.10 mpy. While for Suram West Area fluid, corrosion rates are 12.19, 12.41 and 29.85 mpy at temperature of 30, 40 and 50 C. 60 ppm amine-based inhibitor injection at 50 C showed lowest corrosion rate at 26.92 mpy. Hardness test conducted also showed a drop in HVN no from 48.39 to 13.74
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Moosbrugger, C., Sanders, B. R., Anton, G. J., Hrivnak, N., Kinson, J., Polakowski, C., ... & Scott Jr, W. W. (2003). ASM handbook. S. D. Cramer, & B. S. Covino Jr (Eds.). Materials Park: ASM international.
ASTM, I. (2016). ASTM E8/E8M-16a: Standard Test Methods for Tension Testing of Metallic Materials. West Conshohocken, PA, USA: ASTM International.
ASTM E384-17. (2017). Standard test method for microindentation hardness of materials.
Standard, A. S. T. M. (2014). Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-based Alloys.
API, A. (2012). 5L: Specification for Line Pipe. The American Petro-leum Institute, Washington, DC.
API, R. (2011). 571-Damage Mechanisms Affecting Fixed Equipment in the Refining Industry. April 2011.
Baux, J., Caussé, N., Esvan, J., Delaunay, S., Tireau, J., Roy, M., ... & Pébère, N. (2018). Impedance analysis of film-forming amines for the corrosion protection of a carbon steel. Electrochimica Acta, 283, 699-707.
Díaz-Cruz, M., Domínguez-Aguilar, M. A., Cervantes-Tobón, A., Castro-Domínguez, B., Jiménez-Cruz, F., & Fuentes-Romero, M. T. (2017). Corrosion inhibition of pipeline steel X-70 in sour brine by an imidazoline derivative under flow assisted conditions. International Journal of Electrochemical Science, 12, 7481-7501.
Dariva, C. G., & Galio, A. F. (2014). Corrosion inhibitors–principles, mechanisms and applications. In Developments in corrosion protection. IntechOpen.
Efird, K. D., & Jasinski, R. J. (1989). Effect of the crude oil on corrosion of steel in crude oil/brine production. Corrosion, 45(2), 165-171.
FROSIO, 2007, Surface Treatment Inspector in Accordance with NS 476, National Institute of Technology, Norway
Ramirez, M., Perdomo, J., Morales, J. L., & Viloria, A. (2000, January). Effect of crude oil contaminants on the internal corrosion in gas pipelines. In CORROSION 2000. NACE International.
Jones, D.A., 1997, Principles and prevention of corrosion, Metallurgical and Chemical Engineering Department, University of Nevada, Prentice Hall International, USA.
Gao, G., Liang, C. H., & Wang, H. (2007). Synthesis of tertiary amines and their inhibitive performance on carbon steel corrosion. Corrosion science, 49(4), 1833-1846.
Kiefner, J. F., & Trench, C. J. (2001). Oil pipeline characteristics and risk factors: illustrations from the decade of construction. American Petroleum Institute.
Ajmera, P., Robbins, W., Richter, S., & Nešić, S. (2011). Role of asphaltenes in inhibiting corrosion and altering the wettability of the steel surface. Corrosion, The Journal of Science and Engineering, 67(10), 105006-105006.
Papavinasam, S., 2000, Uhligs Corrosion handbooks, Jhon Wiley & Sons, Inc., USA.
Revie, R.W., and Uhlig, H.H., An Introduction to Corrosion Science and Engineering, Jhon Wiley & Sons, Inc., New Jersey
Roberge, P.R., 2000, Handbook of Corrosion Engineering, McGraw-Hill Book Company, New York
Speight, J. G. In the Chemistry and Technology of Petroleum; Marcel Dekker: New York, NY, 1999; Vol. 3, pp 918.
Cervantes-Tobón, A., Godínez-Salcedo, J. G., Gonzalez-Velazquez, J. L., & Díaz-Cruz, M. (2014). Corrosion rates of API 5L X-52 and X-65 steels in synthetic brines and brines with H2S as a function of rate in a rotating cylinder electrode. International Journal of Electrochemical Science, 9(5), 2454-2469.
Widharto, S.(1999). Karat dan Pencegahannya.Cet.1, Jakarta: Pradnya Paramitha
Vargel, C.(2004). Corrosion of Aluminium, eBook Elsevier Ltd.
DOI: http://dx.doi.org/10.28989/senatik.v5i0.375
Article Metrics
Abstract view : 371 timesPDF (Bahasa Indonesia) - 212 times
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Conference SENATIK P-ISSN :2337-3881 and E-ISSN : 2528-1666
Jumlah penggunjung = orang